How To Install Blade Guard On Ridgid Table Saw?

Most table saws come with a blade guard that helps protect you from injury while using the saw.

However, if your table saw did not come with a blade guard, you can easily install one.

Most hardware stores sell blade guards that are compatible with various types of table saws. Be sure to select a guard that fits your particular model of saw. 

How To Install Blade Guard On Ridgid Table Saw

How to Install Blade Guard on Ridgid Table Saw? To install the blade guard on a Ridgid table saw, follow these steps:

From the bag labeled “Blade Guard,” remove the slide spreader support and the spreader rod. Thread the thumbscrew into the tapped hole and hand-tighten.

Attach the spreader to the spreader support, ensuring that the spreader’s edge meets the spreader’s edge.

Tighten the screws with a 7/16 wrench. Raise the blade and ensure it is square with the table. You need to loosen the two hex head screws holding the blade guard support to the cradle.

Raise the blade guard. Lift both anti-kickback pawls. Tighten both hex head screws. This will ensure that the blade guard is installed correctly and help prevent accidents.

How do you Remove the Guard on a Ridgid Table Saw?

How do you Remove the Guard on a Ridgid Table Saw

Assuming you would like a more in-depth explanation:

The Ridgid table saw is a versatile and powerful tool that can be used to complete various woodworking projects.

Removing the guard before beginning any project is essential to ensure safety while using the saw. To remove the guard, first lower the saw blade.

Next, remove any tools or accessories attached to the saw, such as the rip fence, miter gauge, or blade guard.

Once these items have been removed, the table saw is ready to be used.

Can I Use a Dado Blade on my Ridgid Table Saw?

Can I Use a Dado Blade on my Ridgid Table Saw

Yes, The R4513 table saw from Ridgid can cut dado joints. Dado’s joints are woodworking joints used to join two pieces of wood together.

The dado blade is a specialized blade used to create these joints. When using a dado blade on your R4513 table saw, there are a few things to keep in mind. 

  • First, you will need to adjust the depth of the blade. 
  • Second, you will need to use a push block or another safety device to keep your hands away from the blade. 
  • Third, you will need to ensure that the dado blade is installed correctly before use.

How Do you Assemble a Ridgid Table Saw with Stand?

Assembling a Ridgid table saw with a stand is a simple process that can be completed in just a few minutes.

We begin by removing the metal piece of the blade guard assembly. This piece is slightly thinner than the saw blade and helps keep the kerf open.

Next, you will need to attach the stand to the saw. The stand will provide support for the saw and help to prevent kickback.

Finally, you will need to connect the power supply to the saw. Once the power supply is connected, you can operate the saw.

How do I Adjust my Ridgid Table Saw Fence?

How do I Adjust my Ridgid Table Saw Fence

You can try a few things if you’re having trouble adjusting the fence on your Ridgid table saw.

First, make sure that the fence is locked down securely. If the fence is loose, it will be difficult to adjust the gap.

Try tightening the fence so that it is more secure. You may need to replace the bolts if the fence is still loose. Once the fence is secure, you can begin adjusting the gap.

This can be accomplished by loosening the adjustment knob. Once the knob is loose, you can begin turning it to adjust the gap.

If you’re having trouble getting the gap to the desired width, you may need to use a tape measure to help you. 

What Size Blade does a Ridgid Table Saw Use?

Pointing to his Ridgid table saw’s large, sharp blade, John explains that this model uses a 10-inch blade.

While other size options are available, he prefers the 10-inch blade because it allows him to make more precise cuts.

He also notes that the 10-inch blade is a good size for most big and small projects.

Where are Ridgid Table Saws Manufactured?

Where are Ridgid Table Saws Manufactured

Ridgid table saws are manufactured in Elyria, Ohio. In 1923, the company was founded in North Ridgeville, Ohio, and relocated to its current location in 1943.

After becoming a subsidiary of Emerson Electric in 1966, it became its sole owner.

Ridgid table saws are known for their quality and durability. Throughout its history, the company has manufactured quality products that last.

Ridgid table saws are made with care and attention to detail. The company takes pride in its products and its manufacturing process.

Ridgid table saws are made in the USA. The company is proud of its American-made products. Ridgid table saws are made with high-quality materials and components. 

What is the Horsepower of Ridgid r4512 Table Saw?

The Ridgid r4512 table saw has a horsepower of 25 hp. This means it can deliver significant power and torque, making it perfect for various tasks.

With its high horsepower, the Ridgid r4512 table saw can easily cut through more rigid materials, improving the efficiency of a robust and reliable table saw.


Before you begin, you must take the time to familiarize yourself with the installation process of your chosen blade guard system.

This will help you avoid problems and frustration that could come from not having a clear understanding of the process.

I hope this article has provided the information you need to install your blade guard system correctly and safely.